Filmtec – LP-2540 Reverse Osmosis Membrane

Filmtec – LP-2540 Reverse Osmosis Membrane – LP-2540, 145psi, 850gpd, 99.2 rejection

FILMTEC LP-2540 delivers high quality water at low pressure operation.

The LP-2540 replaces many “first generation” low pressure membrane elements and will purify more water in many older systems, especially on cold water feeds.

May be cleaned over the widest pH range (pH 1-13) for the most effective cleaning.

Tape-wrapped elements are built with the same high quality membranes and materials of construction as industrial elements, without the hard outer shell. This makes them more economical for commercial systems with one or two elements per housing.

1. Permeate flow rate and salt rejection based on the following test conditions: 500 ppm NaCl, 145 psig (10 bar), 77°F (25°C), and 15% recovery

2. Permeate flows for individual elements may vary +/-20%.

3. LP-2540 can replace TW30HP-2540 for low pressure operation.

4.For the purpose of improvement, specifications may be updated periodically.