Aquatec 6800 Series Booster Pump 6840-2J03-B221 + Transformer

YOU WILL RECEIVE:

ONE (1) NEW AQUATEC 6800 SERIES RO BOOSTER PUMP WITH 1/4″ JG INSERTS

PART NUMBER 6840-2J03-B221

INPUT/OUTPUT 1/4″ QUICK CONNECT

24 VAC

ONE (1) NEW 6800 TRANSFORMER 115V

PART NUMBER: TAS 114-19EP

MADE IN THE USA

PUMP

TYPICAL APPLICATIONS:

• Water Treatment/RO
• Carbonation Systems
• Misting Systems
• Alternative Energy/Solar
• Medical Labwater
• Laser Cooling Systems
• Fuel Cells

USE AND BENEFITS:

This pump is usually used to boost water supply pressure to a Reverse Osmosis water system. This pump is good for RO systems that are up to 100GPD capacity.

If your water supply pressure is below 40psi, you should add this pump to your RO system.

This water booster pump is to boost the input water pressure. It is usually used to increase the input water pressure for Reverse Osmosis systems. (boost pressure to 60 to 80 psi).

This pump is suitable for RO systems that use a 24GPD to 100GPD membrane.

For RO systems, an increase in input pressure means an increase in water production and water purity.

RO systems will run more efficient, with less waste water. Since it uses a pressure switch and solenoid valve to turn on/off the water input, it can turn on and turn off more accurately than the mechanical auto shut-off valve.

For large water containers or an open water tank, you can use a float switch or level switch to control the operation of the pump.

Aquatec’s original product, and still the “global standard” in booster pump technology, providing reliable inlet pressure for efficient membrane utilization.

These pumps are capable of continuous duty and are effective for recirculation based applications as well.

They are ideally suited to work with hydro-pneumatic storage systems but are compatible with most hydraulic shut-off valves also.

These pumps are commonly used with one or more of Aquatec’s flow control components including: pressure switches (PSW Series), tank level controllers (TLC Series) or electronic shut-off valves (ESO Series).

TRANSFORMER

Aquatec’s transformers are both current and temperature protected for additional safety protection. Aquatec pump-transformer combinations are designed to operate at maximum efficiency under a wide range of voltage conditions without overheating or overloading. This can save the end-user thousands of kilowatt hours per year compared to less efficient pumps.

Features

• New Aquatec replacement tranformer for 6800 series booster pumps
• Designed and manufactured by Aquatec to ensure compatibility and proper operation
• Standard 2-Prong Plug
• OEM Part

Specifications

• Input Voltage: 116-120 VAC
• Output Voltage Max: 24 VAC
• Cord Length: 6 Feet
• Overload Protection: Circuit Breaker, Auto-Reset