AQUATEC 8851 Series Booster Pump 24VAC 8851-2J03-B421 + Switch

YOU WILL RECEIVE:

ONE (1) NEW AQUATEC 8851 SERIES RO BOOSTER PUMP WITH 3/8″ JG INSERTS

PART NUMBER 8851-2J03-B421

INPUT/OUTPUT 3/8″ QUICK CONNECT

24 VAC

 

ONE (1) NEW AQUATEC PRESSURE SWITCH FOR 6800 AND 8800 BOOSTER PUMPS 3/8″ QUICK CONNECTS

PART NUMBER: PSW 340

 

MADE IN THE USA

 

BETTER PUMPS BETTER LIVING

 

PUMP

TYPICAL APPLICATIONS:

• Water Treatment/RO
• Carbonation Systems
• Misting Systems
• Alternative Energy/Solar
• Medical Labwater
• Laser Cooling Systems
• Fuel Cells

USE AND BENEFITS:

This pump is usually used to boost water supply pressure to a Reverse Osmosis water system.

If your water supply pressure is below 40psi, you should add this pump to your RO system.

This water booster pump is to boost the input water pressure. It is usually used to increase the input water pressure for Reverse Osmosis systems. (boost pressure to 60 to 80 psi).

This pump is suitable for RO systems that use a 100GPD to 200GPD membrane.

For RO systems, an increase in input pressure means an increase in water production and water purity.

RO systems will run more efficient, with less waste water. Since it uses a pressure switch and solenoid valve to turn on/off the water input, it can turn on and turn off more accurately than the mechanical auto shut-off valve.

For large water containers or an open water tank, you can use a float switch or level switch to control the operation of the pump.

Aquatec’s original product, and still the “global standard” in booster pump technology, providing reliable inlet pressure for efficient membrane utilization.

These pumps are capable of continuous duty and are effective for recirculation based applications as well.

They are ideally suited to work with hydro-pneumatic storage systems but are compatible with most hydraulic shut-off valves also. These pumps are commonly used with one or more of Aquatec’s flow control components including: pressure switches (PSW Series), tank level controllers (TLC Series) or electronic shut-off valves (ESO Series).

SWITCH

Aquatec’s pressure and Vacuum Switches (PSW and VSW Series) provide a full range of in-line pressure sensing electrical switches. These switches, typically mounted near a hydropneumatic holding tank, automatically control the system pump and/or solenoid valve as required. They can also be used to enable hydraulic shut-off valves to operate reliably and positively.

Aquatec’s Pressure and Vacuum Switches are normally closed and can be pre-set at various shut-off pressures. If necessary, they can be adapted to operate as normally open switches through minor modifications to the wire terminal connector. The PSW/VSW Series also includes a modular connector for plug-and-play integration with Aquatec’s other system components.

Features:

• Electronically shuts off booster pump if feed water is interrupted
• Compact and inexpensive
• High Reliability
• 100% factory tested

Specifications:

• Port Size: 3/8”
• Pressure: 40PSI
• Voltage: 250 VAC