Hydro-Cure Sediment Filter DG 25/01 Micron 4.5 in x 10 in (Case)

Hydro-Cure Sediment Filter DG 25/01 Micron 4.5 in x 10 in

This listing is for a case of 8 filters. 

This 4.5″ x 9 – 7/8″ cartridge fits most Standard 4.5″x 10″ In Line Filter Housings.

Polypropylene Filter for reduction of: Sand, Silt, Dirt and Rust particles. Reduction claims not performance tested or certified by NSF.

(Hydro-Cure Part Number – DG25010988HC)

PRODUCT DETAILS:

Hydro-Cure cartridges are designed to provide high flow rates with minimum pressure drop. These cartridges are used in a wide variety of applications where economical filters are required. Hydro-Cure Cartridges are manufactured on state-of-the-art production equipment using a computer controlled process to ensure reliability and performance. Due to the innovative design that creates two distinct filter zones, larger particles are trapped on or near the surface of the filter, and the smaller particles are trapped throughout the inner layers of the cartridge. This design allows for optimum dirt holding capacity and minimal change-outs.

• Exceptional strength and self-supporting core
• Superior sediment filtration
• Made of polypropylene resin meeting FDA regulation 21CFR177.1520
• No binders, lubricants or anti-static agents used in manufacturing process
• Provides exceptional chemical compatibility to handle a wide range of process fluids
• Fits most standard Big Blue® and Big Clear filter housings
• Temperature range: 40° to 125° F
• Material: 100% pure polypropylene fibers
• Standard Filter length: 9 7/8″ (25.1 cm)
• Filter I.D.: 1 1/16″ (2.7 cm)
• Filter O.D.: 4 1/2″ (11.43 cm)
• Nominal Micron Rating: 25/01 micron
• Capacity: 6 months usage
• Tested and certified under NSF/ANSI Standard 42

NOTE: Replace this filter at least every six (6) months.