Hydronix 5 Micron 10in x 4.5in Sediment Filter – 12pk
$139.99
Hydronix Water Technology
Hydronix 5 Micron 10″x4.5″ Big Blue Sediment Filter – 12 pack
Save 5%
Description
The Hydronix 10″ Big Blue Sediment Filter is the economical replacement for the Liquatec SDF-45-1005 Big Blue Filter. This 5 Micron Filter, also known as part number SDC-45-1005 contains graded density that provides higher dirt holding capacity than standard spun polypropylene and string wound cartridges. Constructed with 100% polypropylene, this Hydronix Sediment Filter is resistant to chemicals and reduces waterborne contaminants like silt, sediment, sand and rust. Tested and certified by NSF International under ANSI/NSF Standard 42 for material requirements only, this water filter is ideal for a wide range of residential, commercial, industrial and food service applications.
The coreless design of this Hydronix 4 1/2×10 Big Blue Sediment Filter is a cost-effective solution to pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon filters (also known as GAC filters). Do not use this sediment filter with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The operating temperature range for this Big Blue Water Filter is 40 degrees to 145 degrees Fahrenheit (4.4 to 62.8 degrees Celsius). In addition to replacing the Liquatec SDF-45-1005 filter cartridge, this Hydronix sediment water filter is an economical replacement filter for the Watts FPMB-BB5-10 Sediment Water Filter.
Hydronix 10″ Big Blue Water Filter specifications:
- 5 Micron Filter
- Economically priced
- 100% polypropylene
- High chemical resistance
- Flow rate: 1 psi @ 10 gpm
- Dimensions: 4 1/2″ x 9 7/8″
- Higher dirt holding capacity
- Certified NSF Standard 42/FDA approved
- Fits filter housings requiring 10″ Big Blue media
- Liquatec SDF-45-1005 and Watts FPMB-BB5-10 Filter Replacement
This 5 Micron Filter utilizes 4 separate layers of micron filtration, as the outside-in flow allows the outer layer to trap larger sized particles, which results in a much lower pressure drop compared to conventional filters. This multi-stage sediment depth filter is binder free, adhesive free and surfactant free. For optimum performance of your housing system, replace your Hydronix Big Blue Filter every 6 months, depending on water quality and usage. Be sure to measure your filter before purchasing. This sediment filter cartridge fits filter housings requiring 10″ Big Blue media.
Additional information
Weight | 13 lbs |
---|---|
Dimensions | 20 × 14 × 10 in |