Filmtec BW60-1812-75 Tap Water Reverse Osmosis Membrane

This TFC 75 GPD Membrane should be changed every 2-5 years depending on water quality and usage.

Filmtec home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi. The BW60-1812-75 can be used in many Reverse Osmosis Systems that require a 75 GPD membrane.

The Dow Filmtec BW60-1812-75 RO Membrane Specifications:

* Dimensions: 1.75 inches x 11.75 inches

* Max Operating Temp: 113 F

* Max Operating Pressure: 300 psi

* Max Feed Flow Rate: 2 GPM

* Max Feed Silt Density Index (SDI): 5

* Free Chlorine Tolerance: <0.1 ppm * NSF/ANSI Standard 58 Tested and Certified This membrane removes or reduces the following contaminants: arsenic, barium, chromium, cadmium, copper, cysts, fluoride, lead, radium, selenium, turbidity, TDS, nitrate, nitrite, magnesium, calcium, sodium, nickel, mercury, zinc, iron, ammonium, bicarbonate, sulfate, tannin, chloride, bromide, and sediment. For best results the BW60-1812-75 should be changed every 2 to 5 years based on water quality and usage. Pre Filters should be changed regularly to extend the life of your RO Membrane. Also known as part number BW60-1812-75D FILMTEC? reverse osmosis membrane elements for home drinking water are the industry's most reliable. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. FILMTEC elements are shipped dry for convenient handling and long shelf-life. These elements are NSF/ANSI Standard 58 listed. Equipment suppliers can take advantage of FilmTec's Standard 58 listing and participation in the NSF Data Transfer Protocol to reduce costs for reduction claims for their systems. FILMTEC home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi (please see the data sheet for more information). Product Name = FILMTEC BW60-1812-75 Permeate Flow Rate gpd (m3/d) = 75 (12) Stabilized Salt Rejection (%) = 98.0 Minimum Salt Rejection (%) = 96.0 1. Permeate flow and salt rejection based on the following test conditions: 250 ppm softened tap water, 77°F (25°C), 50 psi (3.4 bar), and 15% recovery. 2. Permeate flows for individual elements may vary +/-20%